Arc Inc. Waterproofing Kits
Specially formulated for ARC, Tank/10 Liquid Waterproofing Compound tenaciously bonds to various surfaces to form an utterly protective shield against moisture penetration. The extra protection provided by our joint reinforcement tape and impenetrable, pre-formed corners vastly increases the level of security you achieve with an ARC shower system. When you’re done installing a TrueDEK foundation and thoroughly covering the area with an ARC waterproofing kit, you’ll have a seamless, multi-layer line of defense safeguarding your home and your health.
In addition to its outstanding waterproofing performance characteristics, Tank/10 also provides an anti-fracture membrane to help prevent and limit the effects of slight movement differences between the tile and the substrate below. The impact on your shower is a reduction in the transfer of movement that can form a crack in grout or tile.
Choose from the following kits
Premium Waterproofing Kit
- A ready-to-use kit containing the necessary waterproofing and installation supplies for an ARC shower base and walls in the wet area of a shower
- This kit is for waterproofing an ARC shower base, the surrounding floor to a distance of 2 ft. beyond the base, and the shower walls from floor to ceiling
What's Included?
- 2 gallons of Tank/10 waterproofing compound (covers approximately 120 sq. ft. with 2 coats)
- 75 ft. of joint reinforcement tape (3 - 25 ft. rolls)
- 4 internal corners
- 2 external corners
- 1 mixer valve gasket
- 1 supply gasket
- 32 - #9 x 2" weatherproof screws
- 1 Torx power bit driver
- 6 - 10 oz. tubes of Tank/10 polyurethane construction adhesive
- 1 - 10 oz. tube of painter's acrylic caulk
- 1 paint roller handle
- 2 paint roller covers
- 1 paint brush
- 2 pairs of nitrile gloves (size large)
Pro Waterproofing Kit
- A ready-to-use kit containing the necessary waterproofing and installation supplies for an ARC shower base
- This kit is for waterproofing an ARC shower base, the surrounding floor to a distance of 2 ft. beyond the base, and up the walls 6″ to 12″
What's Included?
- 1/2 gallon of TANK/10 waterproofing compound (covers approximately 30 sq. ft. with two coats)
- 25 ft. of joint reinforcement tape
- 2 internal corner tape reinforcements
- 2 external corner tape reinforcements
- 32 — #9 x 2½” weatherproof screws
- 1 Torx power bit driver
- 6 - 10 oz. tubes of Tank/10 polyurethane construction adhesive
- 1 - 10 oz. tube of painter's acrylic caulk
- 1 paint roller handle
- 2 paint roller covers
- 1 paint brush
- 2 pairs of nitrile gloves (size large)
